EN 17149-1:2024
(Main)Railway applications - Strength assessment of rail vehicle structures - Part 1: General
Railway applications - Strength assessment of rail vehicle structures - Part 1: General
This document supports the other standards in the EN 17149 series, in order to ensure consistency of terminology across the series. It describes the basic terms and definitions as well as general procedures for strength assessments of rail vehicle structures that are manufactured, operated and maintained in accordance with standards valid for rail system applications.
This document is applicable to all kinds of rail vehicles.
The assessment procedure is restricted to ferrous materials and aluminium.
This document does not define design load cases.
This document is not applicable for corrosive conditions or elevated temperature operation in the creep range.
Bahnanwendungen - Festigkeitsnachweis von Schienenfahrzeugstrukturen - Teil 1: Allgemeines
Dieses Dokument unterstützt die anderen Normen der Reihe EN 17149, um die Einheitlichkeit der Terminologie in der Reihe sicherzustellen. Es beschreibt die grundlegenden Begriffe sowie allgemeine Verfahren für den Festigkeitsnachweise von Schienenfahrzeugstrukturen, welche entsprechend den geltenden Normen für Bahnsysteme hergestellt, betrieben und instandgehalten werden.
Dieses Dokument ist für alle Arten von Schienenfahrzeugen anwendbar.
Das Nachweisverfahren beschränkt sich auf eisenhaltige Werkstoffe und Aluminium.
Dieses Dokument legt keine Bemessungslastfälle fest.
Dieses Dokument ist nicht anwendbar für Korrosionszustände oder Betrieb bei erhöhter Temperatur im Kriechbereich.
Applications ferroviaires - Évaluation de la résistance des structures de véhicule ferroviaire - Partie 1 : Généralités
Le présent document s'appuie sur les autres normes de la série EN 17149, afin d'assurer la cohérence de la terminologie dans l'ensemble de la série. Il spécifie les termes et définitions de base ainsi que des procédures générales d'évaluation de la résistance des structures de véhicules ferroviaires qui sont fabriquées, exploitées et maintenues conformément aux normes applicables aux applications ferroviaires.
Le présent document s'applique à tous les types de véhicules ferroviaires.
La procédure d'évaluation se limite aux matériaux ferreux et à l'aluminium.
Le présent document ne définit pas de cas de charge de conception.
Le présent document ne s'applique pas en cas de conditions corrosives ou de conditions d'exploitation à une température élevée dans la plage de fluage.
Železniške naprave - Ocenjevanje odpornosti konstrukcije železniških vozil - 1. del: Splošno
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17149-1:2021
01-september-2021
Železniške naprave - Ocenjevanje odpornosti konstrukcije železniških vozil - 1.
del: Splošno
Railway applications - Strength assessment of railway vehicle structures - Part 1:
General
Bahnanwendungen - Festigkeitsnachweis von Schienenfahrzeugstrukturen - Teil 1:
Allgemeine Anforderungen für Festigkeitsnachweise (Statik und Ermüdung)
Applications ferroviaires - Évaluation de la résistance des structures de véhicule
ferroviaire - Partie 1 : Généralités
Ta slovenski standard je istoveten z: prEN 17149-1
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
oSIST prEN 17149-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17149-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 17149-1:2021
DRAFT
EUROPEAN STANDARD
prEN 17149-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 45.060.01
English Version
Railway applications - Strength assessment of railway
vehicle structures - Part 1: General
Applications ferroviaires - Évaluation de la résistance Bahnanwendungen - Festigkeitsnachweis von
des structures de véhicule ferroviaire - Partie 1 : Schienenfahrzeugstrukturen - Teil 1: Allgemeine
Généralités Anforderungen für Festigkeitsnachweise (Statik und
Ermüdung)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17149-1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17149-1:2021
prEN 17149:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
3.1 General terms and strength related terms . 5
3.2 Material related terms . 7
3.3 Terms related to welding . 8
3.4 Fatigue related terms . 13
4 Symbols and abbreviations . 17
5 Linear stress determination .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.