SIST EN IEC 60068-2-86:2024
(Main)Environmental testing - Part 2-86: Tests -Test Fx: Vibration - Multi-exciter and multi-axis method (IEC 60068-2-86:2024)
Environmental testing - Part 2-86: Tests -Test Fx: Vibration - Multi-exciter and multi-axis method (IEC 60068-2-86:2024)
IEC 60068-2-86:2024 provides a test procedure for use with multi-exciter and multi-axis vibration test systems. The vibration test is intended for general application to components, equipment, and other products, hereinafter referred to as "specimens", subjected to dynamic environments that could arise during an equipment life cycle. Although this document is mainly intended for vibration testing, the procedure is also applied to certain types of shock and transient tests.
Umgebungseinflüsse – Teil 2-86: Prüfverfahren – Prüfung Fx und Leitfaden: Mehrfach-Anregung, Multi-Achsen-Schock und Schwingung (IEC 60068-2-86:2024)
Essais d'environnement - Partie 2-86: Essais - Essai fx: Méthode par excitateurs multiples et axes multiples - Chocs et vibrations - Essais et recommandations (IEC 60068-2-86:2024)
L'IEC 60068-2-86:2024 fournit une procédure d'essai à utiliser avec les systèmes d'essai de vibrations à excitateurs multiples/à axes multiples. Ces essais de vibrations sont destinés à une application générale pour les composants, matériels et autres produits, dénommés ci-après "spécimens", soumis à des sollicitations dynamiques susceptibles de se produire au cours de leur cycle de vie. Même si le présent document est essentiellement destiné aux essais de vibrations, la procédure est également appliquée à certains types d'essais de chocs et de conditions transitoires.
Okoljsko preskušanje - 2-86. del: Preskusi - Preskus Fx: Vibracije - Metoda z večkratnim vzbujanjem in več osmi (IEC 60068-2-86:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60068-2-86:2024
01-junij-2024
Okoljsko preskušanje - 2-86. del: Preskusi - Preskus Fx: Vibracije - Metoda z
večkratnim vzbujanjem in več osmi (IEC 60068-2-86:2024)
Environmental testing - Part 2-86: Tests -Test Fx: Vibration - Multi-exciter and multi-axis
method (IEC 60068-2-86:2024)
Umgebungseinflüsse – Teil 2-86: Prüfverfahren – Prüfung Fx und Leitfaden: Mehrfach-
Anregung, Multi-Achsen-Schock und Schwingung (IEC 60068-2-86:2024)
Essais d'environnement - Partie 2-86: Essais - Essai fx: Méthode par excitateurs
multiples et axes multiples - Chocs et vibrations - Essais et recommandations (IEC
60068-2-86:2024)
Ta slovenski standard je istoveten z: EN IEC 60068-2-86:2024
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
SIST EN IEC 60068-2-86:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60068-2-86:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 60068-2-86:2024
EUROPEAN STANDARD EN IEC 60068-2-86
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2024
ICS 19.040
English Version
Environmental testing - Part 2-86: Tests - Test Fx: Vibration -
Multi-exciter and multi-axis method
(IEC 60068-2-86:2024)
Essais d'environnement - Partie 2-86: Essais - Essai Fx: Umgebungseinflüsse - Teil 2-86: Prüfverfahren - Prüfung
Vibrations - Méthode par excitateurs multiples et axes Fx: Vibration - Multi-Erreger- und Mehrachsenverfahren
multiples (IEC 60068-2-86:2024)
(IEC 60068-2-86:2024)
This European Standard was approved by CENELEC on 2024-03-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60068-2-86:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60068-2-86:2024
EN IEC 60068-2-86:2024 (E)
European foreword
The text of document 104/1035/FDIS, future edition 1 of IEC 60068-2-86, prepared by IEC/TC 104
"Environmental conditions, classification and methods of test" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 60068-2-86:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-12-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-03-21
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60068-2-86:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60068-2-47 NOTE Approved as EN 60068-2-47
IEC 60721 (series) NOTE Approved as EN 60721 (series)
ISO/IEC 17025 NOTE Approved as EN ISO/IEC 17025
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60068-2-86:2024
EN IEC 60068-2-86:2024 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all
...
SLOVENSKI STANDARD
oSIST prEN IEC 60068-2-86:2023
01-julij-2023
Okoljsko preskušanje - 2-86. del: Preskusi - Preskus Fx: Preskušanje z večkratnim
vzbujanjem in večosnim udarjanjem in vibriranjem ter navodilo
Environmental Testing - Part 2-86: Tests-Test Fx: Multi-Exciter and Multi-Axis Shock and
Vibration Testing and Guidance
Ta slovenski standard je istoveten z: prEN IEC 60068-2-86:2023
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
oSIST prEN IEC 60068-2-86:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60068-2-86:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60068-2-86:2023
104/980/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60068-2-86 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-04-28 2023-07-21
SUPERSEDES DOCUMENTS:
104/942/CD, 104/962A/CC
IEC TC 104 : ENVIRONMENTAL CONDITIONS, CLASSIFICATION AND METHODS OF TEST
SECRETARIAT: SECRETARY:
Sweden Mr Henrik Lagerström
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation ,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are remin ded that
the enquiry stage is the final stage for submitting "in some countries" clauses. See AC/22/2007.
TITLE:
Environmental Testing - Part 2-86: Tests-Test Fx: Multi-Exciter and Multi-Axis Shock and Vibration
Testing and Guidance
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60068-2-86:2023
IEC CDV 60068-2-86 © IEC 2023 2 104/980/CDV
1 CONTENTS
2 Contents . 2
3 1 Scope . 6
4 2 Normative References . 7
5 3 Terms and Definitions . 7
6 3.1 Multi-Exciter Single-Axis (MESA) . 7
7 3.2 Multi-Exciter Multi-Axis (MEMA). 7
8 3.3 Single-Input/Single-Output (SISO) . 7
9 3.4 Single-Input/Multiple-Output (SIMO). . 8
10 3.5 Multiple-Input Single-Output (MISO). . 8
11 3.6 Multiple-Input Multiple-Output (MIMO). . 8
12 4 Background . 8
13 4.1 General . 8
14 4.2 Multi-axis and/or multi-exciter testing to achieve an improved distribution of
15 dynamic responses . 8
16 4.3 Multi-exciter testing for large equipment . 9
17 4.4 Multi-axis testing for reliability growth . 9
18 4.5 Multi-axis testing to reduce test durations .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.